当前系统为CentOS Linux release 6.0 (Final),内核版本为2.6.32-71.el6.i686.由于最近内核出现最新的漏洞(linux kernel 又爆内存提权漏洞，>=2.6.39 内核无一幸免{#thread_subject}  和),所以将内核升级至3.2.2最新版本.

1.查看当前系统内核

[root@bogon linux-3.2.2]# uname -r
2.6.32-71.el6.i686

2.下载linux-3.2.2内核包

cd ~
wget -c http://www.kernel.org/pub/linux/kernel/v3.0/linux-3.2.2.tar.bz2
tar jxvf  linux-3.2.2.tar.bz2
cd linux-3.2.2

3.配置内核并安装

make mrproper #清除环境变量，即清除配置文件
make menuconfig #在菜单模式下选择需要编译的内核模块

找到以下选项并选中

networking support—>networking options—>network packet filtering framework(netfilter)

(1).core netfilter configuration

A 勾中”Netfilter connection tracking support” -m state相关模块是依赖它的，不选则没有。

B 将netbios name service protocal support(new) 编译成模块,不然后面升级iptables后启动时会出错

C 勾中“Netfilter Xtables support (required for ip_tables)”

(2).IP: Netfilter Configuration

A 将 “IPv4 connection tracking support (require for NAT)” 编译成模块。

B 勾中IP tables support (required for filtering/masq/NAT) 。

C 将 “Full NAT” 下的 “MASQUERADE target support” 和 “REDIRECT target support” 编译成模块

(3).其它模块可以根据自己的需要进行选择,若不懂可以参考内核配置手册.

make clean #确保所有东西均保持最新状态.
make bzImage #生成内核文件
make modules #编译模块
make modules_install #安装模块
make install #安装

在安装3.2.4版本的内核的时候,会出现”ERROR: modinfo: could not find module ip_tables”这个错误.暂时没有解决!

4.编辑/etc/grub.conf文件,将default=1改为default=0

[root@bogon linux-3.2.2]# cat /etc/grub.conf

grub.conf generated by anaconda

Note that you do not have to rerun grub after making changes to this file

NOTICE: You have a /boot partition. This means that

all kernel and initrd paths are relative to /boot/, eg.

root (hd0,0)

kernel /vmlinuz-version ro root=/dev/mapper/VolGroup-lv_root

initrd /initrd-[generic-]version.img

#boot=/dev/sda

default=0

timeout=5

splashimage=(hd0,0)/grub/splash.xpm.gz

hiddenmenu

title CentOS Linux (3.2.2)

root (hd0,0)

kernel /vmlinuz-3.2.2 ro root=/dev/mapper/VolGroup-lv_root rd_LVM_LV=VolGroup/lv_root rd_LVM_LV=VolGroup/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us crashkernel=auto rhgb quiet

initrd /initramfs-3.2.2.img

title centos (2.6.32-71.el6.i686)

root (hd0,0)

kernel /vmlinuz-2.6.32-71.el6.i686 ro root=/dev/mapper/VolGroup-lv_root rd_LVM_LV=VolGroup/lv_root rd_LVM_LV=VolGroup/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us crashkernel=auto rhgb quiet

initrd /initramfs-2.6.32-71.el6.i686.img

5.重启系统,并查看内核

#reboot

[root@bogon ~]# uname -r
3.2.2

• Centos
• 内核